Volume-2 (National Conference on Advances in Engineering, Technology & Management [AETM'16])
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Effect of Process Parameters on Cutting Rate in WEDM of Incoloy 825 |
Country | : | India |
Authors | : | Mahesh || Dinesh Khanduja || Vikas Kumar || Rajeev Rathi |
Abstract: Incoloy 825 is a super alloyof nickel iron and chromium widely used for heat and corrosion resistant applications. Due to its ultimate chemical properties, it is difficult to machine by conventional machine tools. In this present work, Incoloy 825 has been machined with the help of WEDM. WEDM is an unconventional machine tool used to machine high strength materials with high degree of accuracy.......
Keywords - WEDM, ANOVA, Pulse On Time, Pulse Off Time, Cutting Rate
[1] AmiteshGoswami, Jatinder Kumar "Investigation of surface integrity, material removal rate and wire wear ratio for WEDM of
[2] Nimonic 80A alloy using GRA and Taguchi method" engineering science and technology, an international journal 17(2014)pp.173-
184.
[3] EI-HofyHassan, Advanced machining processes, McGraw-Hill publishing company limited, New York, USA, 2003.
[4] J.T Huang, Y.S Liao "optimization of machining parameters of wire –edm based on grey relational and statistical analysis" int.j.prod
res 41(8)(2003)pp 1707-1720.
[5] S.S. Mahapatra, A.Patnaik. "optimization of wedm process parameters using taguchi method" int.J.adv.manuf.technol. 34(2007) pp
911-925.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Studies on Design and Fabrication of Polymer Based Composite Materials with Fish Scale Reinforcement |
Country | : | India |
Authors | : | Animesh Borah || Duniwanhi Suchiang || Kallol Debnath || Md. Murtaza Alam || Manapuram Muralidhar |
Abstract: Globally, around 80,000 metallic and non-metallic materials have been developed by scientists, engineers and technologists. However, various properties required for suitable applications need to explore newer materials. Composite materials have been developed based on this requirement. Natural fibers include vegetable, mineral and animal fibers. In India, the large number of natural fibers is not utilized properly. In India, fish production 95.7 lakhs of tonnes out of which 7.34 lakhs of tonnes of fish scale is produced every year but unutilized......
KEYWORDS - Animal fiber, composite materials, fish scale composites, hand lay-up technique, Labeo Rohita .
[2] M. Reddy H, Bharath S Kodli, Ravi B Chikmeti, "Experimental investigation of mechanical properties of sisal fiber and rice husk reinforced polymer composite", 11(4), 2014, 05-11.
[3] D. Das, B. Pourdeyhimi, "Composite Nonwoven Materials: Structure, Properties and Applications", Woodhead Publising, Cambride, 2014.
[4] D. J. David, A. Misra, Relating Materials Properties to Structure, (Technomic Publication: Pennsylvania, 1999).
[5] Economic Survey 2014-15 Statistical Appendix, Government of India, Ministry of Finance, Department of Economics Affairs, Economic Division, 2015.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Surface Quality Analysis after EDM Drilling for AA7075 |
Country | : | India |
Authors | : | Neeraj Sharma || Rajesh Khanna || Preeti || MP Garg || Rajat Gupta |
Abstract:Electric Discharge Drill Machine (EDDM) is a spark erosion machining process to generate micro holes in hard to machine and conductive materials. This process is used in space and aerospace, medical and automobile industries. In present research work a brass rod 2 mm diameter was used as a tool electrode........
Keywords- ANOVA, Electric discharge drilling Machining, SR, Taguchi Method.
[1] R. Bhattacharya, V.K. Jain and P.S. Ghoshdastidar, "Numerical simulation of thermal erosion in EDM process", Journal of Institution of Engineers (India) Production Engineering Division, 77, 1996, 13–19.
[2] V.K. Jain, Advanced machining processes (India: Allied Publisher, 2004)
[3] J.A. McGeough, Advanced methods of machining (London: Chapman and Hall, 1998)
[4] Yilmaz, A.T. Bozdana, M.A. Okka and H. Filiz, "An intelligent and automated system for EDM drilling of super alloys", ICRM: The University of Nottingham, Ningbo, 2010, 95–99.
[5] N. Sharma, R. Khanna and R.D. Gupta, "Multi Response Optimization of WEDM Process Parameters with RSM", Procedia Engineering, 64, 2013, 710-719.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Effect of Reinforcements in the enhancement of Mechanical Properties: An Experimental Study |
Country | : | India |
Authors | : | Gourav Kalra || BikramJit Singh |
Abstract: Aluminium alloy is an emerging material used in various applications of aerospace engineering, automobile engineering etc. As per industrial requirements, these materials may be get failed due to their mechanical properties like strength, hardness etc. Mechanical properties of these alloys can be improved with addition of reinforcements. In the present work, effect of these reinforcements on mechanical properties of AA1100.....
Keywords – AA1100, Stir Casting, Reinforcements, Compressive strength, Hardness, UTM, Vickers hardness Machine.
[1] Henri, R.W., Loper, C. R., Rosenthal, P.C. (2014), "Principle of metal casting" Tata McGraw-hill education.
[2] Jokhio, M. H, Panhwar, M.I. and UNAR, M. A. (2011), "Manufacturing of AluminiumComposite Material Using Stir Casting Process" Mehran University research journal of engineering & technology, Vol. 30, No. 1, pp. 53-64.
[3] Hashim J., Thesis (1999) "The Prduction of metal matrix composites using the stir casting technique" Dublin City University Ireland.
[4] Dwivedi, S.P., Gupta, B. and Chaudhary, D. (2013), "The Effect of Process Parameters on Mechanical Stir Casting Process" NIET Journal of Engineering & Technology, Vol. 1, No. 2, pp. 1-7.
[5] Sarangi S., Kumar D. (2009), "Fabrication and Characterisation of Aluminium-Fly ash composite using stir Casting method" National Institute of Technology Rourkela.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | DESIGNING AND DEVELOPMENT OF ECOFRIENDLY ELECTRIC SOLAR CAR |
Country | : | India |
Authors | : | Kanwar J.S Gill || Ravinder Goyal || Kulvir Singh || Champak Gogoi || Shaikh Saqib |
Abstract: As the earth's population is growing day by day and the earth might have some limit to sustain the overgrowth of population. According to the sources the world's population will grow to two to three times the present number in coming century. The most important question arises is that, whether there are sufficient natural resources to sustain the increased population? Here energy is the main issue. In today's era companies dealing with fossil fuels are not able to cope up with the increased demand........
Keywords - Solar, Gearless, Electric car, Multiutility, designed, fabricated.
[1]. C.C. Chan and K.T. Chau, Modern Electric Vehicle Technology, Oxford University Press, New York, 2001.
[2]. K.M. Rahman and M. Ehsani, Performance analysis of electric motor drives for electric and hybrid electric vehicle application, IEEE Power Electronic in Transportation, 29–26, 1996.
[3]. Y. Gao, H. Maghbelli, M. Ehsani, et al., Investigation of proper motor drive characteristics for military vehicle propulsion, Society of Automotive Engineers (SAE) Journal, Paper No. 2003- 01-2296, Warrendale, PA, 2003.
[4]. Z. Rahman. M. Ehsani, and K. Butler, An investigation of electric motor drive characteristics for EV and HEV propulsion systems, Society of Automotive Engineers (SAE) Journal, Paper No.2000–01–3062, Warrendale, PA, 2003.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Review Paper |
Title | : | Influence of Varying Welding Current on Impact Strength of Metal Inert Gas Welding Joints |
Country | : | India |
Authors | : | Vishvesh Dixit || Yashwant Thakur || Abhishek Gaurav || Ishbir Singh || Vijender Rajora |
Abstract: MIG welding is one of the most commonly used welding process. Its productivity and quality depends upon many factors like arc voltage, current, weld speed and heat generated during welding. There have been many researches done on the MIG welding. In this particular study, an attempt has been made to investigate the effect of varying welding current with constant voltage on the impact strength of the weld bead of similar and different material............
Keywords -MIG welding, varying current, impact strength, Mild Steel (MS), Stainless Steel (SS).
[1] Klas Weman, Welding Processes Handbook., CRC Press, 2003.
[2] W. R. Oates and A. M. Saitta, WELDING HANDBOOK, American Welding Society, vol. 4, no. eighth edition.
[3] P. Taylor, A. Saldanha, D. B. Fernandes, and C. A. Mendes, Methodology for determination of parameters for welding MIG with variable polarity, Welding International., vol. 23, no. April 2015, 37–41, 2008.
[4] R. H. G. e Silva, J. C. Dutra, and R. Gohr, Scientific and technological fundamentals for the development of the controlled short circuiting MIG/MAG welding process (CCC)-A literature review. Part 1 of 3: History and wire-electrode melting aspects, Welding International, vol. 22, no. 12, 847–852, 2008.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | UTS Maximization in Solid State Joining Process for AA6082 |
Country | : | India |
Authors | : | Sumit jain || Preety Rani || Rajat gupta || Neeraj Sharma |
Abstract: This study focused on the ultimate tensile strength (UTS) maximization of solid state joining process i.e. friction stir welding (FSW) by using vertical milling machine on AA 6082-T6. In order to evaluate the effect of process parameters such as tool rotational speed, traverse speed and tool pin length on ultimate tensile strength of friction stir welded aluminum alloy 6082-T6, Taguchi parametric design and optimization approach was used......
Keywords - Aluminum alloy, friction stir welding, tensile strength, Taguchi Technique
[1] M Ericsson, and R Sandstro, Influence of welding speed on the fatigue of friction stir welds and comparison with MIG and TIG. International Journal of Fatigue, 25, 2003, 1379–1387.
[2] J Adamowski, C Gambaro, E Lertora, M Ponte, and M Szkodo, Analysis of FSW welds made of aluminium alloy AW6082-T6. International Scientific Journal, 28, 2007, 453-460.
[3] HS Patil, and SN Soman, Experimental study on the effect of welding speed and tool pin profiles on AA6082-O aluminium friction stir welded butt joints, International Journal of Engineering, Science and Technology, 2, 2010, 268-275.
[4] G Raghu Babu, KGK Murti, GR Janardhana, An experimental study on the effect of welding parameters on mechanical and microstructural properties of AA 6082-t6 friction stir welded butt joints, Asian Research Publishing Network, 3, 2008, 1819-6608.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | A Review Paper on Solar Greenhouse Dryer |
Country | : | India |
Authors | : | Nidhi || Pratiksha Verma |
Abstract: Drying process is done for removing the moisture content from the product. Recently, development of greenhouse dryers, namely, solar tunnel dryer, solar tent dryer, improved solar tunnel dryer, and roof type even span solar greenhouse dryer has been studied by various researchers. In this paper, hothouse dryer below natural convection type and forced convection type are studied......
Keywords -Greenhouse dryer, natural convection, forced convection, food products, agricultural products.
[1] R. K. Sahdev, Open sun and greenhouse drying of agricultural and food products: A Review, International Journal of Engineering Research & Technology, 3, 2014, 2278-0181.
[2] O. Prakash, Anil Kumar, Solar greenhouse drying: A review, Renewable and sustainable energy review, 29, 2014, 905-910.
[3] R.K. Behl, R.N. Chhibar, S.Jain, V.P.Bahl, N.EIBassam, Renewable energy sources and their applications, International journal, 2013.
[4] Odesola, I.F. and Ezekwem, Chidozie, The effect of shape and orientation on a greenhouse: A review, an international journal of science and technology, 1, 2012, 2225-8612.
[5] M. Liu, S. Wang, K. Li, Study of the solar energy drying device and its application in traditional Chinese medicine in drying, International journal of clinical medicine, 6, 2015, 271-280.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Utility and challenges of 3 D Printing |
Country | : | India |
Authors | : | Aman Sharma || Harish Garg |
Abstract: This paper is all about the advanced technology of 3D printing, their implementation in the respective fields and its significant contribution in the global world of science and medical. In this paper we will deal with the term Additive Manufacturing or 3D Printing and a little bit of its history. Its various applications along with the type of materials used in the 3-D are also described. We shall also throw some light on the numerous opportunities provided by this emerging technology as well as the risks and challenges related to it. Its environmental aspects are also shown in the paper. Lastly the scope and scenario in future potential of 3D printing is also evaluated......
Keywords -3D Printing; Additive Printing; Fused Deposition Modeling (FDM); Stereo-lithography; ABS Plastics.
[1] Bernard, A. and Fischer, A. ,New trends in rapid product development, CIRP Annals - Manufacturing Technology , Vol. 51, pp. 635-652, 2002.
[2] Birtchnell, T. and Urry, J., "3D, SF and the Future", Futures ,2013, Vol. 50, pp. 25-34.
[3] Council, A. and Petch, M., 3D Printing: Rise of the Third Industrial Revolution ,Gyges, Tumwater, 3D, 2014, p. 116.
[4] Jacobs, P.F., Stereo Lithography and other RP&M Technologies: From Rapid Prototyping to Rapid Tooling ,Society of Manufacturing Engineers (SME), Dearborn, 1996, p. 450
[5] Huang, S.H. , Liu, P. , Mokasdar, A. and , and Hou, L. , Additive manufacturing and its societal impact:a literature review, International Journal of Advanced Manufacturing Technology , Vol. 67 Nos 5/8, 2013, pp. 1191-1203.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Influences of TIG welding parameters on tensile and impact behaviour of aluminium alloy joints: A Review |
Country | : | India |
Authors | : | Yashwant Thakur || Khushmeet Kumar || Krishan Kumar |
Abstract: Aluminium is a non-magnetic, silvery-white, ductile and soft metal which is the most abundant metal and the third most abundant element in the earth crust. It also makes its existence in the form of its alloys in which aluminium is predominant metal. Copper, magnesium, manganese, silicon, tin and zinc are the typical alloying metals. Aluminium alloys are widely used in engineering structure, components and aerospace manufacturing where light weight and corrosion resistance is required......
Keywords -TIG welding, AA7005, Welding current, Gas flow rate, Welding speed, Tensile strength, Impact strength.
[1] Palani PK, Saju M (2013). Optimization of process parameters for TIG welding of Aluminium-65032. International Journal of Engineering Research and Applications,Vol. 3, 230-236.
[2] Indira Rani (2012). Effect of Pulsed Current TIG Welding Parameters on Mechanical Properties of J-Joint Strength of AA6351. The International Journal of Engineering and Science (IJES), 1(1), 2319-1805.
[3] N Karunakaran, V Balasubramanian (2010). Effect of pulsed current on gas tungsten arc welded Aluminum alloy joints. Journals of Science Direct (SP), 21, 278-286.
[4] ST Kumar, V Balasubramanian V, MY Sanavullah (2006). Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy. Journals of Science Direct (SP), 28, 2080-2092.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Impact of Constructive Safety Climate on Worker's Safety |
Country | : | India |
Authors | : | Bobby || Satnam Singh |
Abstract: The aim of the paper is to discover the impact of positive safety climate on worker's safety in the organization and to come across association between a variety of factors of safety climate and worker's safety. This paper reviews a number of studies to learn how a positive safety climate is connected to the safety of an association. Safety climate is a leading indicator of the state of safety in an organization at a particular point in time. Safety climate is the shared perceptions of employees about the policies, procedures and practices of an organization about safety......
Keywords -Accidents, Perception, Safety climate, Safety behavior
[2] Cox, S. J., &Cheyne, A. J. T. (2000).Assessing safety culture in offshore environments. Safety Science, 34, 1-3.
[3] Parker, S. K., Axtell, C. M., & Turner, N. 2001.Designing a safer workplace: Importance of job autonomy, communication quality, and supportive supervisors. Journal of Occupational Health Psychology, 6, 211–228.
[4] James, L. A., & James, L. R. (1989). Integrating work environment perceptions: Explorations into the measurement of meaning. Journal of Applied Psychology, 74, 739– 751
[5] Neal, A., Griffin, M.A., Hart, P.M., 2000.The impact of organizational climate on safety climate and individual behavior. Saf. Sci. 34 (1–3), 99–109.
- Citation
- Abstract
- Reference
- Full PDF
Paper Type | : | Research Paper |
Title | : | Effect of Process Parameters on Tensile Strength of Friction Stir Welded Joint of Pure Copper |
Country | : | India |
Authors | : | Pankaj kumar || Satpal Singh || Gurmeet Singh || Ankit Dua |
Abstract: Article focuses the effect of the processing parameters on tensile behaviour of friction stir welded copper joints. Copper and aluminium are considered as non- weldable with the conventional techniques but this non-conventional method of joining, successfully welds these non-ferrous metals. Effect of parameters on tensile strength of copper weld joint was studied by using full factorial design matrix by considering.....
Keywords -Friction stir welding, Full factorial, Pure copper, Taguchi, Tensile strength
[2] W. Thomas, P. Threadgill, E. Nicholas, "Feasibility of friction stir welding steel," Sci Technol Weld Join , vol. 4(6), pp.365-372,1999.
[3] W.M.Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, C.J. Dawes, "Improvements relating to friction welding"
E.P. Office; 1993.
[4] Y. Abe, T. Kato, K. Mori, "Joinability of aluminium alloy and mild steel sheets by self piercing rivet." J Mater Proc Technol, vol.177,
pp.417-421, 2006.
[5] C.Y. Choi, D.C. Kim, D.G. Nam, Y.D. Kim, Y.D. Park, "A hybrid joining technique for aluminum/zinc coated steels in vehicles," J
Mater Sci Technol, vol.26, pp.858-864, 2010.